calibración
XYZ Calibration Cube 20x20x20mm
FreeCC0BeginnerPrintables
About this model
A 20 mm cube with raised X, Y and Z letters on three faces. You print it, measure each axis with callipers and compare against the nominal 20 mm: the difference tells you whether steps per millimetre or the material's shrinkage compensation are off. It is the first part worth printing on a new machine or after switching filament, and it is published under CC0, that is, with no reuse restrictions.
Technical sheet
- Formats
- STL
- Category
- calibración
- Difficulty
- Beginner
- Estimated time
- —
- Suggested material
- pla · pla-plus
- Supports
- No supports
- Printer type
- Filament (FDM)
- Verified on