Filament calculator: grams, metres and pesos
Converts between filament length, mass in grams and cost in pesos, for 1.75 mm or 2.85 mm and the real density of the material you are using.
Published formula
Tools
Open calculations. Every tool publishes its formula, assumptions and limitations on the same page: a calculator whose maths you cannot check is not a source.
11 results
Costs
Resin calculator: millilitres, grams and cost
Turns the volume your resin slicer reports into grams and pesos, and adds the cost of isopropyl alcohol and the FEP film, which almost nobody counts.
Published formula
3D print cost calculator in Mexican pesos
Adds material, electricity, machine wear, your time and your failure rate to tell you what a part costs you and what you should charge for it.
Published formula
3D printer power consumption calculator
How many kWh your printer uses per hour, per print and per month, and what that costs in pesos at the tariff you enter from your own bill.
Published formula
Reference
3D printing material comparator
Puts PLA, PETG, ABS, ASA, TPU, nylon, PC and the resins side by side using only what the manufacturer actually publishes, leaving the gap visible where it publishes nothing.
Published formula
Nozzle and layer height reference
Which layer heights and extrusion widths are reasonable for each nozzle diameter, and how much print time changes when you move them.
Published formula
3D printer comparator
Up to four printers side by side with their stated specifications, the date on every peso price and a clear notice when we have not tested them.
Published formula
3D printing glossary search
Search a term in Spanish or English, including acronyms and synonyms, and get a one-sentence definition first.
Published formula
Diagnosis
Quiz: which 3D printer suits me?
Five questions about what you print, part size, experience and materials. At the end, the models in our catalogue that fit that profile, and why. Not a ranking: a filter.
Published formula
Diagnostic tree: find your failure by symptom
Describe what you see — it lifted, there are strings, layers are missing, it shifted — and it takes you to the problem entry with causes and fixes ordered by effort.
Published formula
Files
STL vs 3MF: which to use and how to convert
What each format stores, what is lost converting 3MF to STL, and which program opens each one. Written for whoever just downloaded a 3MF and does not know what to do with it.
Published formula